ROGER MAYER Stereo Rack Tape Analogue Emulator Half 008474928004 456

( Brand: Roger Mayer ), ( Part Type: Rack Tape ), ( UPC: 008474928004 )

Review ROGER MAYER Stereo 456 Rack Tape Analogue Emulator

The 008474928004 Stereo Roger 456 Rack Mayer Tape Analogue Emulator Half is a remarkable piece of audio equipment designed to provide an authentic analogue sound experience in a modern digital format. This device is half a rack mountable unit, making it an ideal choice for those seeking to expand their existing analogue setup without requiring too much additional space.

The Stereo Roger 456 Rack Mayer Tape Analogue Emulator Half is based on the iconic tape machines of yesteryears, which are renowned for their warmth, richness, and character. It emulates the distinct sound qualities of these vintage tape machines, injecting a timeless appeal into your digital audio recordings.

This emulator features two independent channels, allowing you to process stereo audio signals separately or in tandem. Each channel is equipped with controls for input gain, output level, bias, and tape speed, enabling you to fine-tune the sound to your liking. The bias control allows you to adjust the level of saturation, while the tape speed knob lets you simulate the speed variations typical of real tape machines.

The Stereo Roger 456 Rack Mayer Tape Analogue Emulator Half also includes a high-pass filter to remove unwanted low-frequency noise, as well as a mix control to blend the processed signal with the original audio. Additionally, it features a dedicated head bump control, which simulates the sound of the tape's head bumping against the tape, adding a subtle yet noticeable layer of character to your sound.

This device is designed with high-quality components and meticulous craftsmanship, ensuring a durable and reliable performance. Its rugged construction and compact size make it perfect for use in studio environments, live performances, or mobile recording setups.

In conclusion, the 008474928004 Stereo Roger 456 Rack Mayer Tape Analogue Emulator Half is an excellent tool for audio professionals and enthusiasts seeking to add a touch of vintage warmth and character to their digital recordings. Its versatility, ease of use, and authentic emulation capabilities make it an indispensable addition to any modern audio workstation.

1. Authentic sound: The analogue emulator provides an authentic sound that digital synthesizers may not be able to achieve.

2. Versatility: The device can emulate a variety of tape machines, allowing for a wide range of sounds and effects.

3. Durability: Analogue equipment is known for its durability, as it does not rely on digital components that may fail over time.

4. Tactile feedback: Analogue equipment provides a tactile feedback that digital synthesizers may not offer, allowing for a more hands-on and intuitive music-making experience.

1. High price: Analogue equipment is generally more expensive than digital synthesizers, and the 008474928004 Stereo Roger 456 Rack Mayer Tape Analogue Emulator Half is no exception.

2. Limited flexibility: While the device offers a wide range of sounds and effects, it may not be as flexible as digital synthesizers, which can be programmed and tweaked to create custom sounds.

3. Maintenance: Analogue equipment requires regular maintenance to keep it running smoothly, which may require additional time and cost.

The 008474928004 Stereo Roger 456 Rack Mayer Tape Analogue Emulator Half is a high-quality analogue synthesizer that offers an authentic sound and a tactile feedback that digital synthesizers may not provide. However, it is also more expensive and less flexible than digital synthesizers, and requires regular maintenance. If you are looking for a unique and authentic sound, and are willing to invest in the upkeep of your equipment, the 008474928004 Stereo Roger 456 Rack Mayer Tape Analogue Emulator Half may be a worthwhile investment.

If you are a music producer or audio engineer looking for a unique and authentic sound, and are willing to invest in the upkeep of your equipment, the 008474928004 Stereo Roger 456 Rack Mayer Tape Analogue Emulator Half may be a worthwhile investment. However, if you are on a budget or looking for a more flexible and versatile synthesizer, you may want to consider a digital synthesizer instead.

Details:

The metal box is the 3rd shielding element.

This effectively enables the tape compression and harmonics to be added at source and especially makes recording of difficult percussive sounds IE drums very easy as all the very fast high frequency peaks are controlled so as not to go into digital distortion. The digital recording process works best from analogue sources.

Constant meter monitoring can now be forgotten with Dawn peak metering too slow to display and track the very fast peaks that give the a to converters trouble.

The 3db point has been set to above 100khz.

We feel confident that the 456 moves the goal post forwards in offering a solution that cannot be obtained by other digital plug ins or combinations of other output effects. Peaks are accurately high speed manipulated with ease and maintain the original phase position in the waveform.

The internal pc connections are between these shielding layers. Shipping is not free to hi, AK, and pr or Canada.

This fact can be observed using the latest high speed storage oscilloscope technology.

Instead of using 0vu 20 DBMS our mastering engineers are setting up now to 0vu 11 DBMS knowing that all peaks are now held below digital distortion 0 DBMS. The input control can now be reduced until the right amount of tape saturation is found by ear. We established our 8 street.

The audio signal path is completely class a with a very high band width . Old legendary albums from analogue master tape recordings when re mastered to CD format are considered to sound pleasing to the listener and in many cases set the benchmark to which people aspire to today. The low end extends to below 10hz.

You can of course set up the 456 with tone and monitor levels with VI meters. Electronic acoustic drum sets, and any percussion instruments with scuffs markings from being struck are non returnable.

5v peak unbalanced output impedance 50 ohms load impedance 10k or greater dynamic range 96db headroom maximum input level 32dbm internal headroom 20db mono 456 size 100mm width x 120mm depth x 50mm height , weight 333g stereo 456 size 220mm width x 185mm depth x 44mm height , weight 1162g power requirements 48v dc at 150ma regulated universal world ac dc switching adaptor supplied 8882shipping free shipping offers apply only to the continental us. The optimum recording level is set in seconds by simply turning up the input control until audible distortion is heard. Zero latency and no extra CPU load plus the ability to multi track in real time recording applications are just some of the advantages.

The 456 extended low and high frequency response exceeds that of an original vintage tape recorder operating at 15ips or 30ips all of course without any tape hiss producing what is in effect HD tape recording. 8th street music 7815 airport highway Pentagon, NJ this is very easy with our stereo model as it has a separate bypass function on each channel for evaluation and set up.

So you can understand that the use of the 456 is unlike any other digital software program and operates with zero latency and any number of them can be used in real time simultaneously thus saving significant studio time. Online music superstore web site in 1996, which was the first of its kind. Any previously recorded digital tracks can have analogue tape characteristics added as in CD mastering or for final mixing.

If it sounds right it is right post production the 456 can be used as a hard insert or for bus mixing applications in typical Dawn applications to give previously recorded tracks or mixes some added warmth and harmonic content. Operational advantages the 456 will control and shape each positive or negative peak giving you confidence of never going into digital distortion and safely use the maximum digital range possible to obtain the best resolution and quality. It continually processes each of the positive and negative peaks independently with zero attack and release time thus maintaining the full audio fidelity of the original signal with desirable analogue recording qualities.

This would be exactly as a vintage tape machine might be setup the 456 tape saturation point will then be at 13dbm or 9vu the same as if actually using tape. You can now adjust the digital recording level to your operating recording level with the Dawn controls or with the output control in the stereo model.

It uses the latest ultra high speed analogue design techniques to accurately duplicate the dynamic and harmonic properties of analogue tape and vintage tape recorders in real time with zero latency or any other time smearing artefacts.

We were the first to take the risk out of doing business online.

The 456 uses our latest triple shielding construction containing a 6 layer pc card with 2 copper power planes. This is the maximum tape saturation point being found.

specifications signalprocessorgo:

• brand: Roger Mayer
• part type: Rack Tape
• upc: 008474928004

Payments signalprocessorgo:

• PayPal

Shipping signalprocessorgo:

• type: Flat
• handling: 1 days
• cost: $0.0

General signalprocessorgo:

• condition: New other see details
• Musical Instruments & Gear > Pro Audio Equipment > Signal Processors/Rack Effects
• in stock: Yes

Returns signalprocessorgo:

• time: 30 Days
• paid by: Buyer
• type: Money Back
• policy: returns accepted

Offer signalprocessorgo:

• best offer: false
• # Sold: 0
• Started: July 24, 2016, 12:26 pm
• # bids: 0
• quantity: 1

Seller signalprocessorgo:

• city: Merchantville, New Jersey
• zipcode: 08109

Ratings:

1. excellent, fast shipping!!! 07-23-16
2. Love it 07-23-16
3. Good deal++++ 07-24-16
4. GREAT DEAL FAST AAAAA+++++GREAT SELLER 07-23-16
5. THANKS 07-23-16